| HIGH-TEMPERATURE-COMPOUNDS |
| Type No. 1 Water – Steam – Air Compound Usage: chiseled flanges, clamps, enclosures (boxes) Fillers: broken glass, 0 – 1mm Temperature: -150C – 600CVery easy flowing compound for standard-jobs. |
|
| Type No. 2 Water – Steam – Air Compound Usage: chiseled flanges, clamps, enclosures (boxes) Fillers: broken glass, 0 – 3mm Temperature: -150C – 600CEasy flowing compound for bad fitting or corroded constructions. The fillers will close gaps between pipe and clamp |
|
| Type No. 5 Water – Steam – Air Compound Usage: stuffing-boxes, pressure-seal-valves, screwed connections, re-injections Fillers: none Temperature: -150C – 600CThis very thin compound will crawl into smallest gaps. |
|
| Type No. 7 Chemical and petrochemical Products – Hydrocarbons Compound Usage: chiseled flanges, clamps, enclosures (boxes) Fillers: broken glass, 0 – 1mm Temperature: -150C – 600CVery easy flowing compound for standard-jobs. |
|
| Type No. 8 Chemical and petrochemical Products – Hydrocarbons Compound Usage: chiseled flanges, clamps, enclosures (boxes) Fillers: broken glass, 0 – 3mm Temperature: -150C – 600CEasy flowing compound for bad fitting or corroded constructions. The fillers will close gaps between pipe and clamp |
|
| Type No. 11 Chemical and petrochemical Products – Hydrocarbons Compound Usage: stuffing-boxes, pressure-seal-valves, screwed connections, re-injections Fillers: none Temperature: -150C – 600CThis very thin compound will crawl into smallest gaps. |
|
| Type No. S11-F Fibre-Compound for a wide range of products (incl. Steam, water and air) Usage: stuffing-boxes, pressure-seal-valves, automatic valves, screwed connections, re-injections Fillers: phenolic-resin fibres and high-temp greases Temperature: -150C – 600CEasy flowing fibre-armed compound for small gaps and high temperatures |
|
| Type No. S11-PTFE PTFE-based compound for strong acids and aggressive chemicals. Usage: Flanges, enclosures and stuffing-boxes Fillers: Wollastonite fibres, 75 Temperature: -150C – 260C / -148F – 500FThis easy flowing compound even resists nitric acid at high concentration |
|
| Type SDVP-02 Hot-Oil and High Temperature Compound Usage: chiseled flanges, clamps, enclosures (boxes) Fillers: PH-fibres, Aluminium, broken glass Temperature : -150C – 800C / 32F – 1472FThis easy flowing compound works excellent on high temperatures and difficult sealing-jobs, i. E. hot-oil, hydrogen-fuel-mixtures, and high-pressure-steam |
|
| Type STR III-F Water – Steam – Air Compound, Usage: chiseled flanges, clamps, enclosures (boxes) Fillers: broken glass, 0 – 1mm Temperature: 0 – 450C / 32F – 842F This is a multi-purpose compound for the big injection-gun. It is delivered in stick of 30 x 230 mm to enable the technicians to inject a lot of material as quick as possible |
|
| Type SC-60 Solvent-Compound Usage: chiseled flanges, clamps, enclosures (boxes) Fillers: broken glass, 0 – 1mm Temperature: 0 – 250C / 32F – 482FThis compound resists aggressive solvents like aldehydes and ketones |
|
| Type S-20 food-grade Food-industry compound Usage: Flanges, enclosures and stuffing-boxes Fillers: none Temperature: 0 – 450C / 32F – 842F This compound will be delivered with a German and US Standard Certificate for use in contact with food. Compound and injection gun has to be heated before injection! |
|
| Type STR I Classic Steam and Water Compound Usage: chiseled flanges, clamps, enclosures (boxes) Temp : 100C – 250C / 212F – 482FCompound and injection gun has to be heated before injection! |
|
| Type STR III Classic Steam and Water Compound Usage: chiseled flanges, clamps, enclosures (boxes) Temp : 200C – 450C / 392F – 842FCompound and injection gun has to be heated before injection! |
|
| Type SPC-55 Unvulcanized rubbercompound in sheets Usage: filling enclosures and vulcanize around a model of the leaking pipe in the workshop Size: 320 x 1000 x 13 mm Temp: -100C – 260C / -148F – 500FVery easy to use. Reduces the time “on site” to minimum. In most cases you don””””””””t need to inject any more compound |
|
| The compounds No. 1 – 11, STRIII-F and SDVP-02 are all produced under the use of a special solvent, which makes the products very easy to inject – even when the product to be sealed is cold. This solvent evaporates while the material is compressed and the compound sets. Because of the use of solvent, we chose ring-pull tin-cans with plastic-caps for the storage. A can contains 10 sticks of about 18 mm diameter and 9 cm length and might be closed again with the cap after opening the ring-pull-cover. For detailed information regarding chemical products and sealing procedures we supply
The sizes of the sticks and the name of the products can be changed to the costumers wishes. All products can be labelled to costumers wish. |
|
