Single Stage Centrifugal Pump

Single Stage Centrifugal Pumps

 

It is intended for pumping clean or very slightly polluted, low viscosity liquids without solid particles fibers and abrasives.

Operation Details

Suction Flange : DN 50… DN 300
Discharge Flange : DN 32… DN 250 mm
Q (Flow) : 1700 m3/h (max.)
H (Head) : 110 m (max.)
Motor (Rotation Per Minute) : 1450 rpm. from 2900 rpm up to 3600 rpm.
t (Operating Temperature) : from -10 °C (min.) to +140 °C (max.)
Pd (Body Pressure Pmax) : 10-16 bars
Direction of Rotation (Motor) : Clockwise (Right)

(Pmax: Suction Pressure + Pump Head in Closed Valve)

(*) The pump material varies depending on the type of fluid, operating temperature and pressure.

Technical Specifications

– Centrifugal pumps with horizontal shaft, single-stage, end suction, closed impeller volute.
– Body sizes conform to TS EN 733 standards.
– Maintenance-free sealed type ball bearings are used in SNSP type of pumps.
– Shaft sealing is provided by soft seal, optionally and according to the type of the fluid pumped pumps with mechanical seals can also be manufactured.
– In addition to 29 models according to according to EN 733 standard, 25 pieces of non-standard models.
– The sizes of non-standard models may be different from the models of other manufacturers.
– Suction and discharge flanges conform to EN 1092-2 / PN 16.
– Bearing group, seal bearing, pump shaft and impeller can be dismantled without separating the volute off the piping installation thanks to design that can be dismantled from the back.
– All of the impellers have been dynamically balanced according to ISO 1940 class 6.3.
– Axial force has been balanced by back wear ring balancing holes system.

Pump Description

– Discharge Flange DN (mm) : 32
– Impeller Nominal Diameter (mm) : 160